Forklift Training Course Seattle - OSHA and CSA establish criteria for forklift safety training that meets existing regulations and standards. Anybody planning to utilize a forklift is required to successfully finish safety training prior to utilizing whatever type of forklift. The accredited Forklift Operator Training Program is designed to offer trainees with the knowledge and practical skills to become a forklift operator.
Vehicle and Mobile Equipment safety regulations that apply to forklift utilization include pre-shift inspections, and regulations for loading and lifting.
Prior to a shift starting, an inspection checklist must be carried out and given to the Supervisor or Instructor. If whichever maintenance issue is discovered, the machine must not be used until the problem is addressed. To be able to indicate the machine is out of order, the keys should be removed from the ignition and a warning tag placed in a visible spot.
Safety regulations for loading will consist of checking the forklift's load rating capacity to determine how much the machine can handle. When starting the machinery, the forks must be in the down position. Bear in mind that there is a loss of about 100 pounds carrying capacity for every inch further away from the carriage which the load is carried.
To be able to safely lift a palletized load, drive the forklift to the pallet and stop with the fork three inches from the load. Level the mast until it is at right angles to the load. Lift the forks to an inch below the slot on the pallet and drive forward. Afterward lift forks four inches. Tilt back the load to be able to secure it for moving. Drive the lift in reverse if the load obscures frontal vision. Check behind and honk to alert other staff. Never allow forks to drag on the ground.
Forklift loads should be loaded in such a way that they are secure and do not create a danger to other people or objects. Restraining loads is needed for materials which may shift during transport and destabilize the forklift.
To be able to avoid the movement of drums, drums could be strapped together to lessen movement. Operators of forklifts must drive slowly when moving liquids, to lessen instability in the forklift.