Forklift Training School Seattle - Forklift Training School - Federal and industry regulators have established the criteria for forklift safety training according to their current regulations and standards. People wishing to utilize a forklift must finish a forklift training program before working with one of these equipment. The accredited Forklift Operator Training Program is designed to provide trainees with the practical skills and information to become a forklift operator.
There are forklift operation safety regulations that must be followed pertaining to pre-shift inspections, and regulations for lifting and loading.
An inspection checklist must be done and given to the supervising authority prior to beginning a shift. When a maintenance issue is uncovered, the use of the particular machine must be stopped until the problem has been addressed. To be able to indicate the machine is out of service, the keys should be removed from the ignition and a warning tag placed in a visible location.
Loading safety regulations consist of checking the rating capacity on the forklift nameplate and knowing if the load weight falls within capacity. The forklift forks must be in the down position when the forklift is starting up. Don't forget that there is a loss of roughly one hundred pounds carrying capacity for every inch further away from the carriage that the load is carried.
To safely lift a palletized load, drive the forklift to the pallet and stop with the fork three inches away from the load. Level the mast until it is at right angles to the load. Lift the forks to one inch beneath the slot on the pallet and drive forward. After that lift forks four inches. Tilt back the load to secure it for moving. Drive the lift backwards if the load obscures frontal vision. Check behind and honk in order to warn other workers. Do not allow forks to drag on the ground.